Machine Embroidery Design for Puffy Embroidery from the Set "3D Numbers"
28x50mm; St: 1823; Clrs: 1/1;
In ZIP: DST JEF PES VIP VP3 HUS

To stitch out this Machine Embroidery Design you will need 3d embroidery foam. You have to put the foam over the embroidery area and then start the machine.

Click on the picture to enlarge

Close up of the embroidery

Simply lay the foam over the embroidery area and start the machine.

When the embroidery is complete, remove the excess foam from the fabric. This comes off very easily. The embroidery will perforate it, making it easy to remove.